Foot & Tire Print Casting Kit
This kit contains all the supplies you'll need to cast footprints and tire prints as well as other impressions in the dirt, sand, mud and snow. This complete outfit is used for making exact reproductions of footprints and tire prints in mud, sand and dirt. Casting material is finely ground for fast-setting and exact detailed reproduction
| Item Description | Specifications |
|---|---|
| Foot Print Frame | Aluminum 14” x 6” x 2” |
| Dirt Hardener | 200ml |
| Flexible Mixing Bowl (dish) | Different Sizes 3 Nos |
| Spatula | Steel |
| Mixing Spoon | Steel |
| Measurement Tape | Small |
| Evidence Tag | Pre Printed (Pack of 50) |
| Wire Gauge | 4” x10” (Pack of 20) |
| Casting Material | 2.5 Kg Top Grade |
| Aerosol Sparer | Plastic |
| Water Can | 1 Ltr |
| Silicon Spray | One Bottle |
| Disposable Pipettes | Pack of 12 |
| Spray to Mark Evidence Area | One Bottle |
| Surface Brush | Normal |
| Molding Clay | 50 gm |
| Molded Carrying Case |
Mikrosil
Mikrosil - a casting material for forensic use - is manufactured in four different colors
Casting Tool marks:
If you use Brown or Gray MIKROSIL we promise an excellent result. MIKROSIL is designed by a criminalist for criminalists. It has been formulated to give the best rendering of small details, highest contrast for microscopical observations, good releasing and short setting time even in cold weather. These properties are of special importance, in cases of very shallow marks and with small details, requiring large magnification.
The use of White or Black MIKROSIL for this type of evidence can sometimes be the best and outstanding method. All crime scene investigators have had to deal with the situation of trying to lift a latent print from an object with a textured surface or a relief pattern. Usually, a latent print would be lifted with adhesive tape, but on textured surface, the tape does not adhere well. The powdered print will be on the raised parts where the tape adheres well and on the lower parts of the surface where the tape will not make good contact, if any at all. If you use MIKROSIL, White for dark powder and Black for light and fluorescent powder, to lift this type of prints, you will not have any problems - all parts of the print will be lifted
Even powdered shoeprints can be lifted with MIKROSIL. The picture below shows a comparison of a shoeprint lifted with White MIKROSIL and the suspected shoe
SILICON Casting Impression Kit
Mikrosil - a casting material for forensic use - is manufactured in four different colors
Casting Tool marks:
If you use Brown or Gray MIKROSIL we promise an excellent result. MIKROSIL is designed by a criminalist for criminalists. It has been formulated to give the best rendering of small details, highest contrast for microscopical observations, good releasing and short setting time even in cold weather. These properties are of special importance, in cases of very shallow marks and with small details, requiring large magnification.
The use of White or Black MIKROSIL for this type of evidence can sometimes be the best and outstanding method. All crime scene investigators have had to deal with the situation of trying to lift a latent print from an object with a textured surface or a relief pattern. Usually, a latent print would be lifted with adhesive tape, but on textured surface, the tape does not adhere well. The powdered print will be on the raised parts where the tape adheres well and on the lower parts of the surface where the tape will not make good contact, if any at all. If you use MIKROSIL, White for dark powder and Black for light and fluorescent powder, to lift this type of prints, you will not have any problems - all parts of the print will be lifted
Even powdered shoeprints can be lifted with MIKROSIL. The picture below shows a comparison of a shoeprint lifted with White MIKROSIL and the suspected shoe
Electrostatic Dust Print Lifting Kit
TechnoSIL Casting Material has been specially developed for forensic applications. The high tearresistance and the ideal recovery after deformation of over 99.8% are the keys to a precise impression result. With its special coloring and the homogenous mixing without air inclusions the impression can be viewed with the stereo microscope without unwanted light reflexes.
TechnoSIL Auto Mix Extruder Gun eliminates manual mixing.
TechnoSIL can be used on curved surfaces, and flat, horizontal or vertical planes. When used on vertical planes, a small amount of silicone is needed. This casting silicone can also be used on smooth or rough surfaces, human skin and blood evidence. TechnoSIL is a highly-sensitive, DNA-friendly casting material for toolmarks, firearms and lifting latent prints from difficult surfaces. TechnoSIL quickly and easily applies casting silicone to a variety of surfaces, including human skin, rough and textured surfaces such as brick, and curved surfaces such as bottle necks.
- Techno Gun (1)
- 50ML Dark Casting Cartridge (1)
- 50 ML Light Casting Cartridge (1)
- Mixing Tips(20)
- Spreader Tips (20)
- Small Spatulas (5) Molded Carrying Case
Electrostatic Dust Print Lifting Kit
The output voltage of this instrument can be continuously adjusted between 8KV and 30KV. The user can decide the voltage according to the thickness of the dust on the ground. Low voltage should be used when the dust on the ground is thick while high voltage should be used when the dust on the ground is thin. With some related experience accumulated after a period of application, the user can achieve the optimum lifting effect with the options provided by the instrument.
| Contents of Kit : | |
|---|---|
| Electrostatic Dust Mark Lifting Device | 01 no |
| Static Discharge Cable | 01 no |
| Film Roll for Lifting Dust Mark 20” wide | 01 no |
| Ground Plane, Steel 4”x6” | 01 no |
| Ground Plane Insulated Sheet 5”x7” | 01 no |
| Heavy Duty Rubber Gloves | 01 no |
| Plastic Handle Scissor | 01 no |
| Wooden Handle Roller | 01 no |
| Set of Photography Rulers (wooden folding, Vinyl, ABFO) | 01 no |
| Set of Adhesive Rulers (L Shape Roll, Rigid Photo Evidence Scale) | 1 Set |
| Silver / Black Aluminum Carrying Case | 1 no |
Master Foot Print Investigation Kit
This is a complete outfit for making exact reproductions of footprints on, mud, sand, dirt and dust. It is excellent for field investigations. Casting material is finely ground for fast-setting and exact detailed reproduction. The kit is complete with application procedures and instructions.
Casting Process
Materials and supplies for casting footprint impressions at the crime scene is for exact reproduction of impression evidence. Resulting casts are rock-hard and require no reinforcement. Use this kit for recovery of impressions found in mud, sand and soil.
Electrostatic Process
One of the most overlooked forms of physical evidence at a crime scene is impression evidence, specifically dust print impressions. Many indoor crime scenes contain varying amounts of dust on different surfaces. That's where the Electrostatic Process of Lifting Foot Print comes in
Often thought of as a form of evidence nearly as valuable as fingerprints, impression evidence must receive priority handling. Most of the times impression evidence exist in the form of footprints. The obvious place to look for footprint impressions is in the soil at or near the crime scene. This might include dust prints or the impressions made from wet shoes on dry floors. A visual search is made prior to any attempts to locate and collect other forms of physical evidence. When outdoors, protect the area by erecting barriers and posting sentries. If footprint evidence is located and the weather is threatening, it may be necessary to erect a tent or similar shelter in order to protect the evidence.
Contents of Kit :
Rechargeable Foot Print Search Light
Electrostatic Dust Print Lifting Device
Static Discharge Cable
Static Discharge Cable
Film Roll - 20” wide
Ground Plane, Steel 4”x6”
Ground Plane Insulated Sheet 5”x7”
Heavy Duty Rubber Gloves
Plastic Handle Scissor
Wooden Handle Roller
Photographic Folding Scale 2Mtr
Pack of Rigid Photo Adhesive Scales
Evidence Storage Boxes
Foot Print Lifters 6” x 15” (Black)
Foot Print Lifters 6” x 15” (White)
Evidence Labels
Wide Angle Flat Foot Print Search Light
Features: -
- 4 Cree LED X 10w each
- 3200 lumens; 6500K
- LED Life - 50000 hours
- Flat light
- Operating voltage 12V
- Runtime - 100 Minutes
- Rechargeable lithium battery
- AC/DC dual-use
- Adjustable Switch
Master Foot Print Investigation Kit
These unique lifters are coated with super sensitive acrylic adhesive for lifting the most minute particles. Simply remove the adhesive protector, apply to the area, lift and mount on backing material supplied with each lifter. Lifters are 6”x15” are available in Black back and white back.
These foot print lifters are uniquely design to allow for an accurate transfer of foot or footwear prints from dusty or dirty surfaces.
BIO - FOAM IMPRESSION SYSTEM
Bio-Foam Test Impression Foam is a closed-cell, low-density impression foam that produces a detailed reproduction of a shoe or other surface. The impression foam accurately records wear patterns and surface defects making it ideal for threedimensional evidence test impressions. Bio-Foam Test Impression Foam is available in a single slab, single slab case, or double slab packaging.